fbpx
Shopping Cart
RollerSafe for helping aids

Wireless brakes, sitski sled

User needs

  • A sitski sled does not have brakes for use on asphalt.
  • The user can scrape ski pole spikes in asphalt, but provides very limited braking effect.
  • The user must train in flat terrain or terrain where speed can be reduced naturally without active braking.

Solution

  • SmartBrake integrated in RollerSafe roller skis. The skis are mounted under the sitski sled.
  • Brake trigger is mounted in ski pole (separate trigger for right and left ski / pole).
  • The user easily adjusts the brake by pressing the trigger on the pole. Requires limited hand power.

User value

  • The user can control the speed easily through the poles and can keep the body in its natural position.
  • No risk of the poles getting in the way of the sled.
  • The user can train in more varied terrain, get a better training effect and at the same time increased safety.
RollerSafe - User
RollerSafe – Electronic roller skis with integrated SmartBrake
RollerSafe - Skate with brake trigger
Brake trigger mounted on top of ski pole

Select your currency
EUREuro

The common part in SmartBrake

The brake activator applies brake force to the caliper so that you don’t have to! Read more about the brake unit.

If the handgrip is a challenge, then this will be your solution

Pulling this lever is super soft, and with an easily accessible parking brake function, your next ride will be much smoother. Learn more about the Brake lever.

When independency and additional safety are your priority

Operate the brake and parking wirelessly from 20 meters distance with this small remote. Read more about the hand controller.